Pom profile fix
The racevisionGame pom still had "profiles", which aren't needed with a single jar build, and the built jar didn't have a mainifest/main class.
See merge request !19
Issue 28 & 36 - encoders and decoders refactor
This resolves#28#36.
This was on the story_61 branch, but I figured it may be helpful to push this into master/other branches before then.
The main changes:
- Moved encoding functions from RaceVisionByteEncoder into their own encoder classes.
- Added a EncoderFactory and DecoderFactory, which return correct en/decoder based on MessageType.
- All encoders implement MessageEncoder interface, and all decoder implement MessageDecoder interface.
Extra changes:
- Added names to most threads that are created.
- Removed the nested while loop from MockOutput, and moved the XML stuff before the main loop (functionally it's the same).
See merge request !23
63. [C, M] I'd like to be able to make small adjustments to the heading of my boat, as Gemma, either upwind or downwind.
Note: each keypress should change the boat's heading by a small amount (3 degrees?) Pressing the 'upwind' key will turn the boat's head towards the wind by that small amount, while the 'downwind' key will do the opposite. Continuing to press the downwind key when the boat is already heading straight downwind, or upwind when heading directly upwind, achieves nothing.
Acceptance criteria:
- The player boat turns towards wind a small amount for each press of the 'upwind' key.
- The player boat turns away from the wind by a small amount for each press of the 'downwind' key.
- If the boat heading is directly into wind after a series of 'upwind' keypresses, the heading will continue to change in the same direction for one more keypress.
- Substitute 'downwind' for 'upwind' for the downwind case.
See merge request !21
Wind/Tack commands disable autoVMG. VMG command enables it.
Upwind command was turning until boat was at 0 degrees, instead of being aligned with wind direction, but that's fixed.
#story[1096]
Story48 & issue 26
This is the merge request for story 48 (http://agilefant.cosc.canterbury.ac.nz:8080/agilefant302/editProject.action?projectId=61#fi.hut.soberit.agilefant.model.Story_1093) ( #29 ) and issue #26.
A.C:
- Wind speed and direction must follow that provided by the Race Status message or messages.
- Arrow aligned with the current wind direction shown on the live race view.
- Arrow orientation adjusts within 1s when changes in the wind direction are received.
- Arrow length is proportional to wind speed.
- Wind speed in m/s (or as defined in story 17) should be easily estimated from the wind arrow.
The wind speed (TWS) should be shown as both a number and in the length of the wind arrow. The arrow length should be always long enough for TWA (wind direction) to be clear; the length should never drop below some minimum value.
This includes issue #26 as story 48 was slightly dependent on that.
Both #29 and issue #26 should be closed once this has been merged.
See merge request !20
Refactored MarkRoundingDecoder - it now implements MessageDecoder.
Tidied up MarkRounding - it is now documented and has getters. Also Created MarkRoundingBoatStatusEnum, MarkRoundingIDEnum, MarkRoundingSideEnum, MarkRoundingTypeEnum.
Added MarkRoundingDecoderTest.
issue #35#36
#story[1095]
Refactored AverageWindDecoder - it now implements MessageDecoder.
Refactored AverageWind - it now uses milliseconds and knots, instead of packed MMperSec and tenths of a second. It also exposes its attributes now.
Added (un)packAverageWindPeriod to AC35UnitConverter.
Added AverageWindDecoderTest.
issue #35#36
#story[1095]
Added RaceStartTypeEnum.
Refactored RaceStartStatusDecoder to implement the MessageDecoder interface.
Documented RaceStartStatus, and it actually exposes its properties now.
Updated RaceStartStatusDecoderTest.
issue #35#36
#story[1095]
Added DecoderFactory. This creates an appropriate decoder based on a MessageType.
BoatActionDecoder implements MessageDecoder.
BoatLocationDecoder implements MessageDecoder.
HeartBeatDecoder implements MessageDecoder.
JoinAcceptance implements MessageDecoder.
RaceStatusDecoder implements MessageDecoder.
RequestToJoinDecoder implements MessageDecoder.
XMLMessageDecoder implements MessageDecoder.
Refactored CourseWind decoder/encoder. CourseWind decoder/encoder is for an individual CourseWind.
CourseWinds decoder/encoder is for the combined message from the API.
Documented BoatAction, and it now contains a BoatActionEnum instead of a byte.
Refactored CourseWind and CourseWinds classes. They now expose correct units, instead of packed units.
Added CourseWindDecoderTest, and updated CourseWindsDecoderTest.
issue #35#36
#story[1095]
Removed redundant/unused conversions.
Documented all of the conversions, and renamed them to pack/unpackX, to match the API spec.
Updated/added some tests in AC35UnitConverterTest.
RaceStatus now contains a Bearing instead of a packed int bearing.
RaceStatus now contains wind speed in knots, instead of MMperSec packed.
This means that only RaceStatus decoder/encoder need to care about the bits-over-wire packed values.
issue #35#36
#story[1095]
Refactored RaceStatusDecoder to be more consistent with other decoders - it now has a getMessage() function.
Added BoatStatus encoder and decoder - the RaceStatus encoder and decoder uses this for BoatStatuses. The BoatStatus encoder doesn't implement the MessageEncoder interface as BoatStatus is not a proper message type (doesn't inherit from AC35Data).
Added remaining cases to EncoderFactory, but commented them out.
BoatStatus now uses BoatStatusEnum instead of a byte.
Added some comments to RaceStatus, and it uses enums instead of bytes.
MockOutput logs a warning if a RaceStatus cannot be encoded.
Added a BoatStatusDecoderTest.
Updated RaceStatusDecoder to use new encoders/decoders.
issue #35#36
#story[1095]
Refactored XMLMessageDecoder to be consistent with other decoders - only needs to expose the XMLMessage.
Refactored BoatLocationDecoder to be consistent with other decoders - only needs to expose the BoatLocation.
Updated XMLMessageDecoderTest to use new encoder/decoder. Also tests all three message types.
Removed XMLMessageEncoderTest as it was redundant.
Updated BinaryMessageDecoderTest.xmlMessageTest() to use updated XMLMessage encoder/decoder.
issue #35#36
#story[1095]
Added HeartBeatDecoder.
Added HeartBeatEncoder.
BinaryMessageDecoder now uses HeartBeatDecoder.
MockOutput now logs a warning if a heartBeat cannot be encoded.
Added HeartBeatDecoderTest.
issue #35#36
#story[1095]
Updated ControllerClient to use RaceVisionByteEncoder.encode(message). It also logs a warning if the encoding fails. Also removed pointless and out of place encode/decode of the action enum.
Added a BoatActionDecoderTest which tests encoding/decoding a BoatAction Message.
issue #35#36
#story[1095]
Added EncoderFactory. This creates specific MessageEncoders. Supports JoinAcceptance and RequestToJoin.
Added MessageEncoder interface.
Added JoinAcceptanceEncoder.
Added encode(AC35Data) function to RaceVisionByteEncoder.
Added RequestToJonEncoder.
Updated RequestToJoin and JoinAcceptance decode/encode tests to use the above.
issue #35#36
#story[1095]
- Dispatch commands with CompositeCommand
- Single WindCommand handles upwind and downwind logic
- Changed key bindings as Mac lacks PgUp PgDn
- ControllerServer is observable, RaceLogic updates CompositeCommand as observer
zwu18
Fraser Cope
Connor Taylor-Brown
Joseph Gardner