Add .hex rule

apps/bounce1/Makefile

@@ -40,6 +40,11 @@ bounce1.out: bounce1.o pio.o system.o timer.o pacer.o
 	$(SIZE) $@
 
 
+# Create hex file for programming from executable file.
+bounce1.hex: bounce1.out
+	$(OBJCOPY) -O ihex bounce1.out bounce1.hex
+
+
 # Target: clean project.
 .PHONY: clean
 clean: 
@@ -48,8 +53,7 @@ clean:
 
 # Target: program project.
 .PHONY: program
-program: bounce1.out
-	$(OBJCOPY) -O ihex bounce1.out bounce1.hex
+program: bounce1.hex
 	dfu-programmer atmega32u2 erase; dfu-programmer atmega32u2 flash bounce1.hex; dfu-programmer atmega32u2 start
 
 

apps/bounce2/Makefile

@@ -46,6 +46,11 @@ bounce2.out: bounce2.o pio.o system.o timer.o display.o ledmat.o pacer.o
 	$(SIZE) $@
 
 
+# Create hex file for programming from executable file.
+bounce2.hex: bounce2.out
+	$(OBJCOPY) -O ihex bounce2.out bounce2.hex
+
+
 # Target: clean project.
 .PHONY: clean
 clean: 
@@ -54,8 +59,7 @@ clean:
 
 # Target: program project.
 .PHONY: program
-program: bounce2.out
-	$(OBJCOPY) -O ihex bounce2.out bounce2.hex
+program: bounce2.hex
 	dfu-programmer atmega32u2 erase; dfu-programmer atmega32u2 flash bounce2.hex; dfu-programmer atmega32u2 start
 
 

apps/bounce3/Makefile

@@ -52,6 +52,11 @@ bounce3.out: bounce3.o pio.o system.o timer.o display.o ledmat.o font.o pacer.o
 	$(SIZE) $@
 
 
+# Create hex file for programming from executable file.
+bounce3.hex: bounce3.out
+	$(OBJCOPY) -O ihex bounce3.out bounce3.hex
+
+
 # Target: clean project.
 .PHONY: clean
 clean: 
@@ -60,8 +65,7 @@ clean:
 
 # Target: program project.
 .PHONY: program
-program: bounce3.out
-	$(OBJCOPY) -O ihex bounce3.out bounce3.hex
+program: bounce3.hex
 	dfu-programmer atmega32u2 erase; dfu-programmer atmega32u2 flash bounce3.hex; dfu-programmer atmega32u2 start
 
 

apps/bounce4/Makefile

@@ -55,6 +55,11 @@ bounce4.out: bounce4.o pio.o system.o timer.o display.o ledmat.o boing.o font.o
 	$(SIZE) $@
 
 
+# Create hex file for programming from executable file.
+bounce4.hex: bounce4.out
+	$(OBJCOPY) -O ihex bounce4.out bounce4.hex
+
+
 # Target: clean project.
 .PHONY: clean
 clean: 
@@ -63,8 +68,7 @@ clean:
 
 # Target: program project.
 .PHONY: program
-program: bounce4.out
-	$(OBJCOPY) -O ihex bounce4.out bounce4.hex
+program: bounce4.hex
 	dfu-programmer atmega32u2 erase; dfu-programmer atmega32u2 flash bounce4.hex; dfu-programmer atmega32u2 start
 
 

apps/bounce5/Makefile

@@ -55,6 +55,11 @@ bounce5.out: bounce5.o pio.o system.o timer.o display.o ledmat.o boing.o font.o
 	$(SIZE) $@
 
 
+# Create hex file for programming from executable file.
+bounce5.hex: bounce5.out
+	$(OBJCOPY) -O ihex bounce5.out bounce5.hex
+
+
 # Target: clean project.
 .PHONY: clean
 clean: 
@@ -63,8 +68,7 @@ clean:
 
 # Target: program project.
 .PHONY: program
-program: bounce5.out
-	$(OBJCOPY) -O ihex bounce5.out bounce5.hex
+program: bounce5.hex
 	dfu-programmer atmega32u2 erase; dfu-programmer atmega32u2 flash bounce5.hex; dfu-programmer atmega32u2 start
 
 

apps/chooser/Makefile

@@ -55,6 +55,11 @@ chooser.out: chooser.o pio.o system.o timer.o display.o ledmat.o navswitch.o fon
 	$(SIZE) $@
 
 
+# Create hex file for programming from executable file.
+chooser.hex: chooser.out
+	$(OBJCOPY) -O ihex chooser.out chooser.hex
+
+
 # Target: clean project.
 .PHONY: clean
 clean: 
@@ -63,8 +68,7 @@ clean:
 
 # Target: program project.
 .PHONY: program
-program: chooser.out
-	$(OBJCOPY) -O ihex chooser.out chooser.hex
+program: chooser.hex
 	dfu-programmer atmega32u2 erase; dfu-programmer atmega32u2 flash chooser.hex; dfu-programmer atmega32u2 start
 
 

apps/demo1/Makefile

@@ -34,6 +34,11 @@ demo1.out: demo1.o pio.o system.o
 	$(SIZE) $@
 
 
+# Create hex file for programming from executable file.
+demo1.hex: demo1.out
+	$(OBJCOPY) -O ihex demo1.out demo1.hex
+
+
 # Target: clean project.
 .PHONY: clean
 clean: 
@@ -42,8 +47,7 @@ clean:
 
 # Target: program project.
 .PHONY: program
-program: demo1.out
-	$(OBJCOPY) -O ihex demo1.out demo1.hex
+program: demo1.hex
 	dfu-programmer atmega32u2 erase; dfu-programmer atmega32u2 flash demo1.hex; dfu-programmer atmega32u2 start
 
 

apps/demo2/Makefile

@@ -37,6 +37,11 @@ demo2.out: demo2.o pio.o system.o led.o
 	$(SIZE) $@
 
 
+# Create hex file for programming from executable file.
+demo2.hex: demo2.out
+	$(OBJCOPY) -O ihex demo2.out demo2.hex
+
+
 # Target: clean project.
 .PHONY: clean
 clean: 
@@ -45,8 +50,7 @@ clean:
 
 # Target: program project.
 .PHONY: program
-program: demo2.out
-	$(OBJCOPY) -O ihex demo2.out demo2.hex
+program: demo2.hex
 	dfu-programmer atmega32u2 erase; dfu-programmer atmega32u2 flash demo2.hex; dfu-programmer atmega32u2 start
 
 

apps/fonttest1/Makefile

@@ -55,6 +55,11 @@ fonttest1.out: fonttest1.o pio.o system.o timer.o display.o ledmat.o navswitch.o
 	$(SIZE) $@
 
 
+# Create hex file for programming from executable file.
+fonttest1.hex: fonttest1.out
+	$(OBJCOPY) -O ihex fonttest1.out fonttest1.hex
+
+
 # Target: clean project.
 .PHONY: clean
 clean: 
@@ -63,8 +68,7 @@ clean:
 
 # Target: program project.
 .PHONY: program
-program: fonttest1.out
-	$(OBJCOPY) -O ihex fonttest1.out fonttest1.hex
+program: fonttest1.hex
 	dfu-programmer atmega32u2 erase; dfu-programmer atmega32u2 flash fonttest1.hex; dfu-programmer atmega32u2 start
 
 

apps/hello1/Makefile

@@ -43,6 +43,11 @@ hello1.out: hello1.o pio.o system.o timer.o ledmat.o pacer.o
 	$(SIZE) $@
 
 
+# Create hex file for programming from executable file.
+hello1.hex: hello1.out
+	$(OBJCOPY) -O ihex hello1.out hello1.hex
+
+
 # Target: clean project.
 .PHONY: clean
 clean: 
@@ -51,8 +56,7 @@ clean:
 
 # Target: program project.
 .PHONY: program
-program: hello1.out
-	$(OBJCOPY) -O ihex hello1.out hello1.hex
+program: hello1.hex
 	dfu-programmer atmega32u2 erase; dfu-programmer atmega32u2 flash hello1.hex; dfu-programmer atmega32u2 start
 
 

apps/hello2/Makefile

@@ -52,6 +52,11 @@ hello2.out: hello2.o pio.o system.o timer.o display.o ledmat.o font.o pacer.o ti
 	$(SIZE) $@
 
 
+# Create hex file for programming from executable file.
+hello2.hex: hello2.out
+	$(OBJCOPY) -O ihex hello2.out hello2.hex
+
+
 # Target: clean project.
 .PHONY: clean
 clean: 
@@ -60,8 +65,7 @@ clean:
 
 # Target: program project.
 .PHONY: program
-program: hello2.out
-	$(OBJCOPY) -O ihex hello2.out hello2.hex
+program: hello2.hex
 	dfu-programmer atmega32u2 erase; dfu-programmer atmega32u2 flash hello2.hex; dfu-programmer atmega32u2 start
 
 

apps/hello3/Makefile

@@ -52,6 +52,11 @@ hello3.out: hello3.o pio.o system.o timer.o display.o ledmat.o font.o pacer.o ti
 	$(SIZE) $@
 
 
+# Create hex file for programming from executable file.
+hello3.hex: hello3.out
+	$(OBJCOPY) -O ihex hello3.out hello3.hex
+
+
 # Target: clean project.
 .PHONY: clean
 clean: 
@@ -60,8 +65,7 @@ clean:
 
 # Target: program project.
 .PHONY: program
-program: hello3.out
-	$(OBJCOPY) -O ihex hello3.out hello3.hex
+program: hello3.hex
 	dfu-programmer atmega32u2 erase; dfu-programmer atmega32u2 flash hello3.hex; dfu-programmer atmega32u2 start
 
 

apps/hello4/Makefile

@@ -55,6 +55,11 @@ hello4.out: hello4.o pio.o system.o timer.o display.o ledmat.o navswitch.o font.
 	$(SIZE) $@
 
 
+# Create hex file for programming from executable file.
+hello4.hex: hello4.out
+	$(OBJCOPY) -O ihex hello4.out hello4.hex
+
+
 # Target: clean project.
 .PHONY: clean
 clean: 
@@ -63,8 +68,7 @@ clean:
 
 # Target: program project.
 .PHONY: program
-program: hello4.out
-	$(OBJCOPY) -O ihex hello4.out hello4.hex
+program: hello4.hex
 	dfu-programmer atmega32u2 erase; dfu-programmer atmega32u2 flash hello4.hex; dfu-programmer atmega32u2 start
 
 

apps/hello5/Makefile

@@ -55,6 +55,11 @@ hello5.out: hello5.o pio.o system.o timer.o display.o ledmat.o navswitch.o font.
 	$(SIZE) $@
 
 
+# Create hex file for programming from executable file.
+hello5.hex: hello5.out
+	$(OBJCOPY) -O ihex hello5.out hello5.hex
+
+
 # Target: clean project.
 .PHONY: clean
 clean: 
@@ -63,8 +68,7 @@ clean:
 
 # Target: program project.
 .PHONY: program
-program: hello5.out
-	$(OBJCOPY) -O ihex hello5.out hello5.hex
+program: hello5.hex
 	dfu-programmer atmega32u2 erase; dfu-programmer atmega32u2 flash hello5.hex; dfu-programmer atmega32u2 start
 
 

apps/ir_grab1/Makefile

@@ -58,6 +58,11 @@ ir_grab1.out: ir_grab1.o pio.o system.o timer.o display.o ir.o ledmat.o navswitc
 	$(SIZE) $@
 
 
+# Create hex file for programming from executable file.
+ir_grab1.hex: ir_grab1.out
+	$(OBJCOPY) -O ihex ir_grab1.out ir_grab1.hex
+
+
 # Target: clean project.
 .PHONY: clean
 clean: 
@@ -66,8 +71,7 @@ clean:
 
 # Target: program project.
 .PHONY: program
-program: ir_grab1.out
-	$(OBJCOPY) -O ihex ir_grab1.out ir_grab1.hex
+program: ir_grab1.hex
 	dfu-programmer atmega32u2 erase; dfu-programmer atmega32u2 flash ir_grab1.hex; dfu-programmer atmega32u2 start
 
 

apps/ir_grab2/Makefile

@@ -61,6 +61,11 @@ ir_grab2.out: ir_grab2.o pio.o system.o timer.o display.o ir.o ledmat.o navswitc
 	$(SIZE) $@
 
 
+# Create hex file for programming from executable file.
+ir_grab2.hex: ir_grab2.out
+	$(OBJCOPY) -O ihex ir_grab2.out ir_grab2.hex
+
+
 # Target: clean project.
 .PHONY: clean
 clean: 
@@ -69,8 +74,7 @@ clean:
 
 # Target: program project.
 .PHONY: program
-program: ir_grab2.out
-	$(OBJCOPY) -O ihex ir_grab2.out ir_grab2.hex
+program: ir_grab2.hex
 	dfu-programmer atmega32u2 erase; dfu-programmer atmega32u2 flash ir_grab2.hex; dfu-programmer atmega32u2 start
 
 

apps/ir_grab3/Makefile

@@ -67,6 +67,11 @@ ir_grab3.out: ir_grab3.o eeprom.o pio.o system.o timer.o button.o display.o ir.o
 	$(SIZE) $@
 
 
+# Create hex file for programming from executable file.
+ir_grab3.hex: ir_grab3.out
+	$(OBJCOPY) -O ihex ir_grab3.out ir_grab3.hex
+
+
 # Target: clean project.
 .PHONY: clean
 clean: 
@@ -75,8 +80,7 @@ clean:
 
 # Target: program project.
 .PHONY: program
-program: ir_grab3.out
-	$(OBJCOPY) -O ihex ir_grab3.out ir_grab3.hex
+program: ir_grab3.hex
 	dfu-programmer atmega32u2 erase; dfu-programmer atmega32u2 flash ir_grab3.hex; dfu-programmer atmega32u2 start
 
 

apps/ir_serial_test1/Makefile

@@ -61,6 +61,11 @@ ir_serial_test1.out: ir_serial_test1.o pio.o system.o timer.o display.o ir.o ir_
 	$(SIZE) $@
 
 
+# Create hex file for programming from executable file.
+ir_serial_test1.hex: ir_serial_test1.out
+	$(OBJCOPY) -O ihex ir_serial_test1.out ir_serial_test1.hex
+
+
 # Target: clean project.
 .PHONY: clean
 clean: 
@@ -69,8 +74,7 @@ clean:
 
 # Target: program project.
 .PHONY: program
-program: ir_serial_test1.out
-	$(OBJCOPY) -O ihex ir_serial_test1.out ir_serial_test1.hex
+program: ir_serial_test1.hex
 	dfu-programmer atmega32u2 erase; dfu-programmer atmega32u2 flash ir_serial_test1.hex; dfu-programmer atmega32u2 start
 
 

apps/ir_serial_test2/Makefile

@@ -61,6 +61,11 @@ ir_serial_test2.out: ir_serial_test2.o pio.o system.o timer.o display.o ir.o ir_
 	$(SIZE) $@
 
 
+# Create hex file for programming from executable file.
+ir_serial_test2.hex: ir_serial_test2.out
+	$(OBJCOPY) -O ihex ir_serial_test2.out ir_serial_test2.hex
+
+
 # Target: clean project.
 .PHONY: clean
 clean: 
@@ -69,8 +74,7 @@ clean:
 
 # Target: program project.
 .PHONY: program
-program: ir_serial_test2.out
-	$(OBJCOPY) -O ihex ir_serial_test2.out ir_serial_test2.hex
+program: ir_serial_test2.hex
 	dfu-programmer atmega32u2 erase; dfu-programmer atmega32u2 flash ir_serial_test2.hex; dfu-programmer atmega32u2 start
 
 

apps/ir_serial_test3/Makefile

@@ -61,6 +61,11 @@ ir_serial_test3.out: ir_serial_test3.o pio.o system.o timer.o display.o ir.o ir_
 	$(SIZE) $@
 
 
+# Create hex file for programming from executable file.
+ir_serial_test3.hex: ir_serial_test3.out
+	$(OBJCOPY) -O ihex ir_serial_test3.out ir_serial_test3.hex
+
+
 # Target: clean project.
 .PHONY: clean
 clean: 
@@ -69,8 +74,7 @@ clean:
 
 # Target: program project.
 .PHONY: program
-program: ir_serial_test3.out
-	$(OBJCOPY) -O ihex ir_serial_test3.out ir_serial_test3.hex
+program: ir_serial_test3.hex
 	dfu-programmer atmega32u2 erase; dfu-programmer atmega32u2 flash ir_serial_test3.hex; dfu-programmer atmega32u2 start
 
 

apps/ir_uart_test1/Makefile

@@ -67,6 +67,11 @@ ir_uart_test1.out: ir_uart_test1.o ir_uart.o pio.o prescale.o system.o timer.o t
 	$(SIZE) $@
 
 
+# Create hex file for programming from executable file.
+ir_uart_test1.hex: ir_uart_test1.out
+	$(OBJCOPY) -O ihex ir_uart_test1.out ir_uart_test1.hex
+
+
 # Target: clean project.
 .PHONY: clean
 clean: 
@@ -75,8 +80,7 @@ clean:
 
 # Target: program project.
 .PHONY: program
-program: ir_uart_test1.out
-	$(OBJCOPY) -O ihex ir_uart_test1.out ir_uart_test1.hex
+program: ir_uart_test1.hex
 	dfu-programmer atmega32u2 erase; dfu-programmer atmega32u2 flash ir_uart_test1.hex; dfu-programmer atmega32u2 start
 
 

apps/ir_uart_test2/Makefile

@@ -67,6 +67,11 @@ ir_uart_test2.out: ir_uart_test2.o ir_uart.o pio.o prescale.o system.o timer.o t
 	$(SIZE) $@
 
 
+# Create hex file for programming from executable file.
+ir_uart_test2.hex: ir_uart_test2.out
+	$(OBJCOPY) -O ihex ir_uart_test2.out ir_uart_test2.hex
+
+
 # Target: clean project.
 .PHONY: clean
 clean: 
@@ -75,8 +80,7 @@ clean:
 
 # Target: program project.
 .PHONY: program
-program: ir_uart_test2.out
-	$(OBJCOPY) -O ihex ir_uart_test2.out ir_uart_test2.hex
+program: ir_uart_test2.hex
 	dfu-programmer atmega32u2 erase; dfu-programmer atmega32u2 flash ir_uart_test2.hex; dfu-programmer atmega32u2 start
 
 

apps/ir_uart_test3/Makefile

@@ -70,6 +70,11 @@ ir_uart_test3.out: ir_uart_test3.o ir_uart.o pio.o prescale.o system.o timer.o t
 	$(SIZE) $@
 
 
+# Create hex file for programming from executable file.
+ir_uart_test3.hex: ir_uart_test3.out
+	$(OBJCOPY) -O ihex ir_uart_test3.out ir_uart_test3.hex
+
+
 # Target: clean project.
 .PHONY: clean
 clean: 
@@ -78,8 +83,7 @@ clean:
 
 # Target: program project.
 .PHONY: program
-program: ir_uart_test3.out
-	$(OBJCOPY) -O ihex ir_uart_test3.out ir_uart_test3.hex
+program: ir_uart_test3.hex
 	dfu-programmer atmega32u2 erase; dfu-programmer atmega32u2 flash ir_uart_test3.hex; dfu-programmer atmega32u2 start
 
 

apps/led0/Makefile

@@ -43,6 +43,11 @@ led0.out: led0.o pio.o system.o timer.o led.o pacer.o
 	$(SIZE) $@
 
 
+# Create hex file for programming from executable file.
+led0.hex: led0.out
+	$(OBJCOPY) -O ihex led0.out led0.hex
+
+
 # Target: clean project.
 .PHONY: clean
 clean: 
@@ -51,8 +56,7 @@ clean:
 
 # Target: program project.
 .PHONY: program
-program: led0.out
-	$(OBJCOPY) -O ihex led0.out led0.hex
+program: led0.hex
 	dfu-programmer atmega32u2 erase; dfu-programmer atmega32u2 flash led0.hex; dfu-programmer atmega32u2 start
 
 

apps/led1/Makefile

@@ -43,6 +43,11 @@ led1.out: led1.o pio.o system.o timer.o led.o pacer.o
 	$(SIZE) $@
 
 
+# Create hex file for programming from executable file.
+led1.hex: led1.out
+	$(OBJCOPY) -O ihex led1.out led1.hex
+
+
 # Target: clean project.
 .PHONY: clean
 clean: 
@@ -51,8 +56,7 @@ clean:
 
 # Target: program project.
 .PHONY: program
-program: led1.out
-	$(OBJCOPY) -O ihex led1.out led1.hex
+program: led1.hex
 	dfu-programmer atmega32u2 erase; dfu-programmer atmega32u2 flash led1.hex; dfu-programmer atmega32u2 start
 
 

apps/led1/led1.c

@@ -1,6 +1,7 @@
 /** @file   led1.c
     @author M.P. Hayes
     @date   5 Oct 2010
+    @descr  This flashes the LED twice per second.
 */
 
 #include "system.h"
@@ -8,11 +9,14 @@
 #include "pacer.h"
 
 
-/* Define polling rate in Hz.  */
+/* Define polling rate in Hz.  (Note, this is much faster than
+ needed for this application.)  */
 #define LOOP_RATE 1000
 
+/* LED flash rate (Hz).  */
 #define LED_RATE 2
 
+
 int main (void)
 {
     unsigned int count = 0;

apps/led2/Makefile

@@ -46,6 +46,11 @@ led2.out: led2.o pio.o system.o timer.o led.o navswitch.o pacer.o
 	$(SIZE) $@
 
 
+# Create hex file for programming from executable file.
+led2.hex: led2.out
+	$(OBJCOPY) -O ihex led2.out led2.hex
+
+
 # Target: clean project.
 .PHONY: clean
 clean: 
@@ -54,8 +59,7 @@ clean:
 
 # Target: program project.
 .PHONY: program
-program: led2.out
-	$(OBJCOPY) -O ihex led2.out led2.hex
+program: led2.hex
 	dfu-programmer atmega32u2 erase; dfu-programmer atmega32u2 flash led2.hex; dfu-programmer atmega32u2 start
 
 

apps/led2/led2.c

@@ -9,14 +9,14 @@
 #include "pacer.h"
 
 
-/* Define polling rate in Hz.  */
+/* Define polling rate in Hz.  (Note, this is much faster than
+ needed for this application.)  */
 #define LOOP_RATE 1000
 
 #define LED_RATE_INC 2
 #define LED_RATE_MIN 0
 #define LED_RATE_MAX 100
 
-typedef struct pen pen_t;
 
 
 int main (void)

apps/led3/Makefile

@@ -46,6 +46,11 @@ led3.out: led3.o pio.o system.o timer.o led.o navswitch.o pacer.o
 	$(SIZE) $@
 
 
+# Create hex file for programming from executable file.
+led3.hex: led3.out
+	$(OBJCOPY) -O ihex led3.out led3.hex
+
+
 # Target: clean project.
 .PHONY: clean
 clean: 
@@ -54,8 +59,7 @@ clean:
 
 # Target: program project.
 .PHONY: program
-program: led3.out
-	$(OBJCOPY) -O ihex led3.out led3.hex
+program: led3.hex
 	dfu-programmer atmega32u2 erase; dfu-programmer atmega32u2 flash led3.hex; dfu-programmer atmega32u2 start
 
 

apps/led4/Makefile

@@ -46,6 +46,11 @@ led4.out: led4.o pio.o system.o timer.o led.o navswitch.o pacer.o
 	$(SIZE) $@
 
 
+# Create hex file for programming from executable file.
+led4.hex: led4.out
+	$(OBJCOPY) -O ihex led4.out led4.hex
+
+
 # Target: clean project.
 .PHONY: clean
 clean: 
@@ -54,8 +59,7 @@ clean:
 
 # Target: program project.
 .PHONY: program
-program: led4.out
-	$(OBJCOPY) -O ihex led4.out led4.hex
+program: led4.hex
 	dfu-programmer atmega32u2 erase; dfu-programmer atmega32u2 flash led4.hex; dfu-programmer atmega32u2 start
 
 

apps/led4/led4.c

@@ -14,8 +14,6 @@
 
 #define LED_RATE 40
 
-typedef struct pen pen_t;
-
 
 int main (void)
 {

apps/led5/Makefile

@@ -40,6 +40,11 @@ led5.out: led5.o pio.o system.o timer.o led.o
 	$(SIZE) $@
 
 
+# Create hex file for programming from executable file.
+led5.hex: led5.out
+	$(OBJCOPY) -O ihex led5.out led5.hex
+
+
 # Target: clean project.
 .PHONY: clean
 clean: 
@@ -48,8 +53,7 @@ clean:
 
 # Target: program project.
 .PHONY: program
-program: led5.out
-	$(OBJCOPY) -O ihex led5.out led5.hex
+program: led5.hex
 	dfu-programmer atmega32u2 erase; dfu-programmer atmega32u2 flash led5.hex; dfu-programmer atmega32u2 start
 
 

apps/pio1/Makefile

@@ -34,6 +34,11 @@ pio1.out: pio1.o pio.o system.o
 	$(SIZE) $@
 
 
+# Create hex file for programming from executable file.
+pio1.hex: pio1.out
+	$(OBJCOPY) -O ihex pio1.out pio1.hex
+
+
 # Target: clean project.
 .PHONY: clean
 clean: 
@@ -42,8 +47,7 @@ clean:
 
 # Target: program project.
 .PHONY: program
-program: pio1.out
-	$(OBJCOPY) -O ihex pio1.out pio1.hex
+program: pio1.hex
 	dfu-programmer atmega32u2 erase; dfu-programmer atmega32u2 flash pio1.hex; dfu-programmer atmega32u2 start
 
 

apps/pio2/Makefile

@@ -34,6 +34,11 @@ pio2.out: pio2.o pio.o system.o
 	$(SIZE) $@
 
 
+# Create hex file for programming from executable file.
+pio2.hex: pio2.out
+	$(OBJCOPY) -O ihex pio2.out pio2.hex
+
+
 # Target: clean project.
 .PHONY: clean
 clean: 
@@ -42,8 +47,7 @@ clean:
 
 # Target: program project.
 .PHONY: program
-program: pio2.out
-	$(OBJCOPY) -O ihex pio2.out pio2.hex
+program: pio2.hex
 	dfu-programmer atmega32u2 erase; dfu-programmer atmega32u2 flash pio2.hex; dfu-programmer atmega32u2 start
 
 

apps/pio3/Makefile

@@ -37,6 +37,11 @@ pio3.out: pio3.o pio.o system.o timer.o
 	$(SIZE) $@
 
 
+# Create hex file for programming from executable file.
+pio3.hex: pio3.out
+	$(OBJCOPY) -O ihex pio3.out pio3.hex
+
+
 # Target: clean project.
 .PHONY: clean
 clean: 
@@ -45,8 +50,7 @@ clean:
 
 # Target: program project.
 .PHONY: program
-program: pio3.out
-	$(OBJCOPY) -O ihex pio3.out pio3.hex
+program: pio3.hex
 	dfu-programmer atmega32u2 erase; dfu-programmer atmega32u2 flash pio3.hex; dfu-programmer atmega32u2 start
 
 

apps/scribble1/Makefile

@@ -61,6 +61,11 @@ scribble1.out: scribble1.o pio.o system.o timer.o button.o display.o led.o ledma
 	$(SIZE) $@
 
 
+# Create hex file for programming from executable file.
+scribble1.hex: scribble1.out
+	$(OBJCOPY) -O ihex scribble1.out scribble1.hex
+
+
 # Target: clean project.
 .PHONY: clean
 clean: 
@@ -69,8 +74,7 @@ clean:
 
 # Target: program project.
 .PHONY: program
-program: scribble1.out
-	$(OBJCOPY) -O ihex scribble1.out scribble1.hex
+program: scribble1.hex
 	dfu-programmer atmega32u2 erase; dfu-programmer atmega32u2 flash scribble1.hex; dfu-programmer atmega32u2 start
 
 

apps/snake1/Makefile

@@ -55,6 +55,11 @@ snake1.out: snake1.o pio.o system.o timer.o display.o ledmat.o navswitch.o font.
 	$(SIZE) $@
 
 
+# Create hex file for programming from executable file.
+snake1.hex: snake1.out
+	$(OBJCOPY) -O ihex snake1.out snake1.hex
+
+
 # Target: clean project.
 .PHONY: clean
 clean: 
@@ -63,8 +68,7 @@ clean:
 
 # Target: program project.
 .PHONY: program
-program: snake1.out
-	$(OBJCOPY) -O ihex snake1.out snake1.hex
+program: snake1.hex
 	dfu-programmer atmega32u2 erase; dfu-programmer atmega32u2 flash snake1.hex; dfu-programmer atmega32u2 start
 
 

apps/space10/Makefile

@@ -70,6 +70,11 @@ space10.out: space10.o flasher.o spacey.o eeprom.o pio.o system.o timer.o displa
 	$(SIZE) $@
 
 
+# Create hex file for programming from executable file.
+space10.hex: space10.out
+	$(OBJCOPY) -O ihex space10.out space10.hex
+
+
 # Target: clean project.
 .PHONY: clean
 clean: 
@@ -78,8 +83,7 @@ clean:
 
 # Target: program project.
 .PHONY: program
-program: space10.out
-	$(OBJCOPY) -O ihex space10.out space10.hex
+program: space10.hex
 	dfu-programmer atmega32u2 erase; dfu-programmer atmega32u2 flash space10.hex; dfu-programmer atmega32u2 start
 
 

apps/space11/Makefile

@@ -70,6 +70,11 @@ space11.out: space11.o flasher.o spacey.o eeprom.o pio.o system.o timer.o displa
 	$(SIZE) $@
 
 
+# Create hex file for programming from executable file.
+space11.hex: space11.out
+	$(OBJCOPY) -O ihex space11.out space11.hex
+
+
 # Target: clean project.
 .PHONY: clean
 clean: 
@@ -78,8 +83,7 @@ clean:
 
 # Target: program project.
 .PHONY: program
-program: space11.out
-	$(OBJCOPY) -O ihex space11.out space11.hex
+program: space11.hex
 	dfu-programmer atmega32u2 erase; dfu-programmer atmega32u2 flash space11.hex; dfu-programmer atmega32u2 start
 
 

apps/space12/Makefile

@@ -79,6 +79,11 @@ space12.out: space12.o flasher.o spacey.o eeprom.o pio.o system.o timer.o displa
 	$(SIZE) $@
 
 
+# Create hex file for programming from executable file.
+space12.hex: space12.out
+	$(OBJCOPY) -O ihex space12.out space12.hex
+
+
 # Target: clean project.
 .PHONY: clean
 clean: 
@@ -87,8 +92,7 @@ clean:
 
 # Target: program project.
 .PHONY: program
-program: space12.out
-	$(OBJCOPY) -O ihex space12.out space12.hex
+program: space12.hex
 	dfu-programmer atmega32u2 erase; dfu-programmer atmega32u2 flash space12.hex; dfu-programmer atmega32u2 start
 
 

apps/space9/Makefile

@@ -70,6 +70,11 @@ space9.out: space9.o flasher.o spacey.o eeprom.o pio.o system.o timer.o display.
 	$(SIZE) $@
 
 
+# Create hex file for programming from executable file.
+space9.hex: space9.out
+	$(OBJCOPY) -O ihex space9.out space9.hex
+
+
 # Target: clean project.
 .PHONY: clean
 clean: 
@@ -78,8 +83,7 @@ clean:
 
 # Target: program project.
 .PHONY: program
-program: space9.out
-	$(OBJCOPY) -O ihex space9.out space9.hex
+program: space9.hex
 	dfu-programmer atmega32u2 erase; dfu-programmer atmega32u2 flash space9.hex; dfu-programmer atmega32u2 start
 
 

apps/spacey_remote1/Makefile

@@ -61,6 +61,11 @@ spacey_remote1.out: spacey_remote1.o pio.o system.o timer.o display.o ir.o ir_se
 	$(SIZE) $@
 
 
+# Create hex file for programming from executable file.
+spacey_remote1.hex: spacey_remote1.out
+	$(OBJCOPY) -O ihex spacey_remote1.out spacey_remote1.hex
+
+
 # Target: clean project.
 .PHONY: clean
 clean: 
@@ -69,8 +74,7 @@ clean:
 
 # Target: program project.
 .PHONY: program
-program: spacey_remote1.out
-	$(OBJCOPY) -O ihex spacey_remote1.out spacey_remote1.hex
+program: spacey_remote1.hex
 	dfu-programmer atmega32u2 erase; dfu-programmer atmega32u2 flash spacey_remote1.hex; dfu-programmer atmega32u2 start
 
 

apps/squeak0/Makefile

@@ -49,6 +49,11 @@ squeak0.out: squeak0.o pio.o system.o timer.o mmelody.o ticker.o tweeter.o task.
 	$(SIZE) $@
 
 
+# Create hex file for programming from executable file.
+squeak0.hex: squeak0.out
+	$(OBJCOPY) -O ihex squeak0.out squeak0.hex
+
+
 # Target: clean project.
 .PHONY: clean
 clean: 
@@ -57,8 +62,7 @@ clean:
 
 # Target: program project.
 .PHONY: program
-program: squeak0.out
-	$(OBJCOPY) -O ihex squeak0.out squeak0.hex
+program: squeak0.hex
 	dfu-programmer atmega32u2 erase; dfu-programmer atmega32u2 flash squeak0.hex; dfu-programmer atmega32u2 start
 
 

apps/squeak1/Makefile

@@ -52,6 +52,11 @@ squeak1.out: squeak1.o pio.o system.o timer.o led.o mmelody.o ticker.o tweeter.o
 	$(SIZE) $@
 
 
+# Create hex file for programming from executable file.
+squeak1.hex: squeak1.out
+	$(OBJCOPY) -O ihex squeak1.out squeak1.hex
+
+
 # Target: clean project.
 .PHONY: clean
 clean: 
@@ -60,8 +65,7 @@ clean:
 
 # Target: program project.
 .PHONY: program
-program: squeak1.out
-	$(OBJCOPY) -O ihex squeak1.out squeak1.hex
+program: squeak1.hex
 	dfu-programmer atmega32u2 erase; dfu-programmer atmega32u2 flash squeak1.hex; dfu-programmer atmega32u2 start
 
 

apps/squeak2/Makefile

@@ -55,6 +55,11 @@ squeak2.out: squeak2.o pio.o system.o timer.o button.o led.o mmelody.o ticker.o
 	$(SIZE) $@
 
 
+# Create hex file for programming from executable file.
+squeak2.hex: squeak2.out
+	$(OBJCOPY) -O ihex squeak2.out squeak2.hex
+
+
 # Target: clean project.
 .PHONY: clean
 clean: 
@@ -63,8 +68,7 @@ clean:
 
 # Target: program project.
 .PHONY: program
-program: squeak2.out
-	$(OBJCOPY) -O ihex squeak2.out squeak2.hex
+program: squeak2.hex
 	dfu-programmer atmega32u2 erase; dfu-programmer atmega32u2 flash squeak2.hex; dfu-programmer atmega32u2 start
 
 

apps/squeak3/Makefile

@@ -67,6 +67,11 @@ squeak3.out: squeak3.o pio.o system.o timer.o button.o display.o led.o ledmat.o
 	$(SIZE) $@
 
 
+# Create hex file for programming from executable file.
+squeak3.hex: squeak3.out
+	$(OBJCOPY) -O ihex squeak3.out squeak3.hex
+
+
 # Target: clean project.
 .PHONY: clean
 clean: 
@@ -75,8 +80,7 @@ clean:
 
 # Target: program project.
 .PHONY: program
-program: squeak3.out
-	$(OBJCOPY) -O ihex squeak3.out squeak3.hex
+program: squeak3.hex
 	dfu-programmer atmega32u2 erase; dfu-programmer atmega32u2 flash squeak3.hex; dfu-programmer atmega32u2 start
 
 

apps/squeak4/Makefile

@@ -67,6 +67,11 @@ squeak4.out: squeak4.o pio.o system.o timer.o button.o display.o led.o ledmat.o
 	$(SIZE) $@
 
 
+# Create hex file for programming from executable file.
+squeak4.hex: squeak4.out
+	$(OBJCOPY) -O ihex squeak4.out squeak4.hex
+
+
 # Target: clean project.
 .PHONY: clean
 clean: 
@@ -75,8 +80,7 @@ clean:
 
 # Target: program project.
 .PHONY: program
-program: squeak4.out
-	$(OBJCOPY) -O ihex squeak4.out squeak4.hex
+program: squeak4.hex
 	dfu-programmer atmega32u2 erase; dfu-programmer atmega32u2 flash squeak4.hex; dfu-programmer atmega32u2 start
 
 

apps/steer1/Makefile

@@ -55,6 +55,11 @@ steer1.out: steer1.o pio.o system.o timer.o display.o ledmat.o navswitch.o font.
 	$(SIZE) $@
 
 
+# Create hex file for programming from executable file.
+steer1.hex: steer1.out
+	$(OBJCOPY) -O ihex steer1.out steer1.hex
+
+
 # Target: clean project.
 .PHONY: clean
 clean: 
@@ -63,8 +68,7 @@ clean:
 
 # Target: program project.
 .PHONY: program
-program: steer1.out
-	$(OBJCOPY) -O ihex steer1.out steer1.hex
+program: steer1.hex
 	dfu-programmer atmega32u2 erase; dfu-programmer atmega32u2 flash steer1.hex; dfu-programmer atmega32u2 start
 
 

apps/stopwatch1/Makefile

@@ -55,6 +55,11 @@ stopwatch1.out: stopwatch1.o pio.o system.o timer.o button.o display.o ledmat.o
 	$(SIZE) $@
 
 
+# Create hex file for programming from executable file.
+stopwatch1.hex: stopwatch1.out
+	$(OBJCOPY) -O ihex stopwatch1.out stopwatch1.hex
+
+
 # Target: clean project.
 .PHONY: clean
 clean: 
@@ -63,8 +68,7 @@ clean:
 
 # Target: program project.
 .PHONY: program
-program: stopwatch1.out
-	$(OBJCOPY) -O ihex stopwatch1.out stopwatch1.hex
+program: stopwatch1.hex
 	dfu-programmer atmega32u2 erase; dfu-programmer atmega32u2 flash stopwatch1.hex; dfu-programmer atmega32u2 start
 
 

apps/task1/Makefile

@@ -43,6 +43,11 @@ task1.out: task1.o pio.o system.o timer.o led.o task.o
 	$(SIZE) $@
 
 
+# Create hex file for programming from executable file.
+task1.hex: task1.out
+	$(OBJCOPY) -O ihex task1.out task1.hex
+
+
 # Target: clean project.
 .PHONY: clean
 clean: 
@@ -51,8 +56,7 @@ clean:
 
 # Target: program project.
 .PHONY: program
-program: task1.out
-	$(OBJCOPY) -O ihex task1.out task1.hex
+program: task1.hex
 	dfu-programmer atmega32u2 erase; dfu-programmer atmega32u2 flash task1.hex; dfu-programmer atmega32u2 start
 
 

apps/task2/Makefile

@@ -55,6 +55,11 @@ task2.out: task2.o pio.o system.o timer.o display.o led.o ledmat.o font.o task.o
 	$(SIZE) $@
 
 
+# Create hex file for programming from executable file.
+task2.hex: task2.out
+	$(OBJCOPY) -O ihex task2.out task2.hex
+
+
 # Target: clean project.
 .PHONY: clean
 clean: 
@@ -63,8 +68,7 @@ clean:
 
 # Target: program project.
 .PHONY: program
-program: task2.out
-	$(OBJCOPY) -O ihex task2.out task2.hex
+program: task2.hex
 	dfu-programmer atmega32u2 erase; dfu-programmer atmega32u2 flash task2.hex; dfu-programmer atmega32u2 start
 
 

apps/tdmdemo1/Makefile

@@ -43,6 +43,11 @@ tdmdemo1.out: tdmdemo1.o pio.o system.o timer.o ledmat.o pacer.o
 	$(SIZE) $@
 
 
+# Create hex file for programming from executable file.
+tdmdemo1.hex: tdmdemo1.out
+	$(OBJCOPY) -O ihex tdmdemo1.out tdmdemo1.hex
+
+
 # Target: clean project.
 .PHONY: clean
 clean: 
@@ -51,8 +56,7 @@ clean:
 
 # Target: program project.
 .PHONY: program
-program: tdmdemo1.out
-	$(OBJCOPY) -O ihex tdmdemo1.out tdmdemo1.hex
+program: tdmdemo1.hex
 	dfu-programmer atmega32u2 erase; dfu-programmer atmega32u2 flash tdmdemo1.hex; dfu-programmer atmega32u2 start
 
 

apps/tdmdemo2/Makefile

@@ -46,6 +46,11 @@ tdmdemo2.out: tdmdemo2.o pio.o system.o timer.o ledmat.o navswitch.o pacer.o
 	$(SIZE) $@
 
 
+# Create hex file for programming from executable file.
+tdmdemo2.hex: tdmdemo2.out
+	$(OBJCOPY) -O ihex tdmdemo2.out tdmdemo2.hex
+
+
 # Target: clean project.
 .PHONY: clean
 clean: 
@@ -54,8 +59,7 @@ clean:
 
 # Target: program project.
 .PHONY: program
-program: tdmdemo2.out
-	$(OBJCOPY) -O ihex tdmdemo2.out tdmdemo2.hex
+program: tdmdemo2.hex
 	dfu-programmer atmega32u2 erase; dfu-programmer atmega32u2 flash tdmdemo2.hex; dfu-programmer atmega32u2 start
 
 

apps/updown1/Makefile

@@ -52,6 +52,11 @@ updown1.out: updown1.o pio.o system.o timer.o display.o ledmat.o font.o pacer.o
 	$(SIZE) $@
 
 
+# Create hex file for programming from executable file.
+updown1.hex: updown1.out
+	$(OBJCOPY) -O ihex updown1.out updown1.hex
+
+
 # Target: clean project.
 .PHONY: clean
 clean: 
@@ -60,8 +65,7 @@ clean:
 
 # Target: program project.
 .PHONY: program
-program: updown1.out
-	$(OBJCOPY) -O ihex updown1.out updown1.hex
+program: updown1.hex
 	dfu-programmer atmega32u2 erase; dfu-programmer atmega32u2 flash updown1.hex; dfu-programmer atmega32u2 start
 
 

apps/updown2/Makefile

@@ -55,6 +55,11 @@ updown2.out: updown2.o pio.o system.o timer.o display.o ledmat.o navswitch.o fon
 	$(SIZE) $@
 
 
+# Create hex file for programming from executable file.
+updown2.hex: updown2.out
+	$(OBJCOPY) -O ihex updown2.out updown2.hex
+
+
 # Target: clean project.
 .PHONY: clean
 clean: 
@@ -63,8 +68,7 @@ clean:
 
 # Target: program project.
 .PHONY: program
-program: updown2.out
-	$(OBJCOPY) -O ihex updown2.out updown2.hex
+program: updown2.hex
 	dfu-programmer atmega32u2 erase; dfu-programmer atmega32u2 flash updown2.hex; dfu-programmer atmega32u2 start
 
 

apps/voltmeter1/Makefile

@@ -55,6 +55,11 @@ voltmeter1.out: voltmeter1.o adc.o pio.o system.o timer.o display.o ledmat.o fon
 	$(SIZE) $@
 
 
+# Create hex file for programming from executable file.
+voltmeter1.hex: voltmeter1.out
+	$(OBJCOPY) -O ihex voltmeter1.out voltmeter1.hex
+
+
 # Target: clean project.
 .PHONY: clean
 clean: 
@@ -63,8 +68,7 @@ clean:
 
 # Target: program project.
 .PHONY: program
-program: voltmeter1.out
-	$(OBJCOPY) -O ihex voltmeter1.out voltmeter1.hex
+program: voltmeter1.hex
 	dfu-programmer atmega32u2 erase; dfu-programmer atmega32u2 flash voltmeter1.hex; dfu-programmer atmega32u2 start