Added a dedicatedServer module.
Removed Visualiser module.
Removed mock module.
Removed network module.
Fixed weird exception non-handling that appeared for some reason.
Issue 18 track alpha
This should resolve#18.
Track point system is now a line, and updated more frequently.
Line fades over time.
The boat wake is also longer, and has a black dot at the end.
See merge request !28
Map wind rotation
Note: we'd like to generate a realistic course layout, that can vary from race to race (but not within a race, for now.) The generated layout must be sent through the API in the format given by the race.xml section of the AC35 Streaming Data Interface Specification. The AC35 Protocol (sections 31.4 and 31.5) specifies the requirements for a course:
* First leg of the course (from start line to first mark) must be a reaching leg
* Next legs are windward/leeward, and boats complete either two or three laps of this section
* Final leg to finish line may be a reaching leg
* A boat should take around 25 minutes to complete the course in the wind conditions at the start of the race (AC35 protocol, section 31.5)
You should assume that the windward/leeward marks and start/finish lines are always compounds of two marks.
Acceptance criteria:
* The layout must be sent over the API in a race.xml message, plus boat location messages for the marks as required, before any other boat location messages are sent.
* Each mark must be defined using boat "SourceID"s (see definition of race.xml) so their positions can be adjusted later.
* The course must meet the requirements given in the AC35 Protocol.
* The course limits should be set to clear all marks by at least several boat-lengths.
* The entire race area within the limits must be on the water.
See merge request !22
Slightly refactored ResizableRaceCanvas - removed a redundant drawPoint() function, functions which alter the gc stroke call save/restore.
Text is drawn black, at 20pts.
The drawBoats() function: instead of drawing everything for each boat, one boat at a time, it draws the track points for all boats, then wake for all boats, etc..., to have better layering.
issue #18
Created FrameRateTracker which can be used to track framerate.
Updated RequestToJoinEnum and JoinAcceptanceEnum to match the agreed connection API.
Added AssignPlayerBoat message, which is used internally on the client to assign the player a source ID once they have connected.
Fixed some race conditions in the MessageRouter.
Updated ConnectionAcceptor.CheckClientConnection to wait slightly longer before removing connection (there was a slight race condition before).
Race no longer has a reference to LatestMessages. LatestMessages no longer has specific messages types in it.
Created RaceState class, which contains the state that is shared between VisualiserRaceState and MockRaceState (currently only used on visualiser).
Split VisualiserRace into VisualiserRaceState and VisualiserRaceService.
Added the VisualiserRace commands (BoatLocatonCommand, RaceStatusCommand, etc...).
Slightly increased the preferred width of race.fxml table columns.
issues #27#37#35
#story[1095]
Added ConnectionToServerCommandFactory, and JoinSuccessfulCommand, RaceParticipantsFullCOmmand, ServerFullCommand.
Added IncomingHeartBeatCommandFactory, and IncomingHeartBeatCommand.
Added ConnectionToServerState, which represents the client's connection state to server.
Renamed VisualiserInput to VisualiserRaceController.
Added ConnectionToServer, which tracks the client's connection to server.
Added ConnectionToServerController, which accepts JoinAcceptance messages, turns them into commands, and passes them to ConnectionToServer.
Added IncomingHeartBeatService, which tracks the heart beat status of the connection.
Added IncomingHeartBeatController, which accepts HeartBeat messages, turns them into commands, and passes them to IncomingHeartBeatService.
Refactored ServerConnection a bit.
#story[1095]
-updated port and starboard boat checks
-added gps method to check if on correct side of a line
-updated pos check method to make boats round marks with the new tech
# Conflicts:
# racevisionGame/src/main/java/mock/app/ConnectionAcceptor.java
# racevisionGame/src/main/java/mock/app/Event.java
# racevisionGame/src/main/java/mock/model/commandFactory/TackGybeCommand.java
# racevisionGame/src/main/java/mock/model/commandFactory/VMGCommand.java
-updated port and starboard boat checks
-added gps method to check if on correct side of a line
-updated pos check method to make boats round marks with the new tech
# Conflicts:
# racevisionGame/src/main/java/mock/app/ConnectionAcceptor.java
# racevisionGame/src/main/java/mock/app/Event.java
# racevisionGame/src/main/java/mock/model/commandFactory/TackGybeCommand.java
# racevisionGame/src/main/java/mock/model/commandFactory/VMGCommand.java
Also got client-server handshake working. Multiple clients can connect and control their own boat.
The client's boat has a larger black triangle drawn around it. Probably needs tidying up.
Added isClientBoat boolean to VisualiserBoat.
WindGenerator is now an interface, implemented by ConstantWindGenerator (useful for testing) and RandomWindGenerator. Added ConstantWindGeneratorTest.
RandomWindGenerator was formerly WindGenerator.
The WindGenerator is passed in to MockRace.
CommandFactory throws a CommandConstructionException if it cannot create a command.
MessageSerialiser and MessageDeserialiser correctly terminate on error.
Readded VisualiserInput's switch statement in the main loop, pending a refactor.
Removed the sleep statement from LobbyController - it was blocking javaFX thread.
Lobby.fxml: moved buttons and text input into grid panes, so they don't break when you resize screen.
Added some test object creation functions in several test classes (MockRaceTest.createMockRace(), BoatXMLReaderTest.createBoatDataSource(), etc...).
#story[1095]
63. [C, M] I'd like to be able to make small adjustments to the heading of my boat, as Gemma, either upwind or downwind.
Note: each keypress should change the boat's heading by a small amount (3 degrees?) Pressing the 'upwind' key will turn the boat's head towards the wind by that small amount, while the 'downwind' key will do the opposite. Continuing to press the downwind key when the boat is already heading straight downwind, or upwind when heading directly upwind, achieves nothing.
Acceptance criteria:
- The player boat turns towards wind a small amount for each press of the 'upwind' key.
- The player boat turns away from the wind by a small amount for each press of the 'downwind' key.
- If the boat heading is directly into wind after a series of 'upwind' keypresses, the heading will continue to change in the same direction for one more keypress.
- Substitute 'downwind' for 'upwind' for the downwind case.
See merge request !21
Wind/Tack commands disable autoVMG. VMG command enables it.
Upwind command was turning until boat was at 0 degrees, instead of being aligned with wind direction, but that's fixed.
#story[1096]
- Figured out the different situations that can occur using accurate points of sail
- Mathed out the rotation angle for each situation
- Manual testing carried out by running simulations
- Manual testing carried out using pen and paper
#story[1098]
- Implemented drawSails method
- Sail position is displayed and updated using a boat's heading
- Sails conform to 'Points of sail'
- Javadoc'd new method and tidied up existing
- Sped up track point frequency (visualiserBoat class)
- Optimised imports (any other classes changed)
- A lot of canvas drawing and sail rotating issues were discovered and eventually overcome along the way. Using a sail image to draw and rotate on the existing canvas rather than a JavaFX shape on a new canvas was the final decision.
#story[1098]
Refactored MarkRoundingDecoder - it now implements MessageDecoder.
Tidied up MarkRounding - it is now documented and has getters. Also Created MarkRoundingBoatStatusEnum, MarkRoundingIDEnum, MarkRoundingSideEnum, MarkRoundingTypeEnum.
Added MarkRoundingDecoderTest.
issue #35#36
#story[1095]
Refactored AverageWindDecoder - it now implements MessageDecoder.
Refactored AverageWind - it now uses milliseconds and knots, instead of packed MMperSec and tenths of a second. It also exposes its attributes now.
Added (un)packAverageWindPeriod to AC35UnitConverter.
Added AverageWindDecoderTest.
issue #35#36
#story[1095]
Added RaceStartTypeEnum.
Refactored RaceStartStatusDecoder to implement the MessageDecoder interface.
Documented RaceStartStatus, and it actually exposes its properties now.
Updated RaceStartStatusDecoderTest.
issue #35#36
#story[1095]
Added DecoderFactory. This creates an appropriate decoder based on a MessageType.
BoatActionDecoder implements MessageDecoder.
BoatLocationDecoder implements MessageDecoder.
HeartBeatDecoder implements MessageDecoder.
JoinAcceptance implements MessageDecoder.
RaceStatusDecoder implements MessageDecoder.
RequestToJoinDecoder implements MessageDecoder.
XMLMessageDecoder implements MessageDecoder.
Refactored CourseWind decoder/encoder. CourseWind decoder/encoder is for an individual CourseWind.
CourseWinds decoder/encoder is for the combined message from the API.
Documented BoatAction, and it now contains a BoatActionEnum instead of a byte.
Refactored CourseWind and CourseWinds classes. They now expose correct units, instead of packed units.
Added CourseWindDecoderTest, and updated CourseWindsDecoderTest.
issue #35#36
#story[1095]
Removed redundant/unused conversions.
Documented all of the conversions, and renamed them to pack/unpackX, to match the API spec.
Updated/added some tests in AC35UnitConverterTest.
RaceStatus now contains a Bearing instead of a packed int bearing.
RaceStatus now contains wind speed in knots, instead of MMperSec packed.
This means that only RaceStatus decoder/encoder need to care about the bits-over-wire packed values.
issue #35#36
#story[1095]
Refactored RaceStatusDecoder to be more consistent with other decoders - it now has a getMessage() function.
Added BoatStatus encoder and decoder - the RaceStatus encoder and decoder uses this for BoatStatuses. The BoatStatus encoder doesn't implement the MessageEncoder interface as BoatStatus is not a proper message type (doesn't inherit from AC35Data).
Added remaining cases to EncoderFactory, but commented them out.
BoatStatus now uses BoatStatusEnum instead of a byte.
Added some comments to RaceStatus, and it uses enums instead of bytes.
MockOutput logs a warning if a RaceStatus cannot be encoded.
Added a BoatStatusDecoderTest.
Updated RaceStatusDecoder to use new encoders/decoders.
issue #35#36
#story[1095]
Refactored XMLMessageDecoder to be consistent with other decoders - only needs to expose the XMLMessage.
Refactored BoatLocationDecoder to be consistent with other decoders - only needs to expose the BoatLocation.
Updated XMLMessageDecoderTest to use new encoder/decoder. Also tests all three message types.
Removed XMLMessageEncoderTest as it was redundant.
Updated BinaryMessageDecoderTest.xmlMessageTest() to use updated XMLMessage encoder/decoder.
issue #35#36
#story[1095]
Added HeartBeatDecoder.
Added HeartBeatEncoder.
BinaryMessageDecoder now uses HeartBeatDecoder.
MockOutput now logs a warning if a heartBeat cannot be encoded.
Added HeartBeatDecoderTest.
issue #35#36
#story[1095]
Updated ControllerClient to use RaceVisionByteEncoder.encode(message). It also logs a warning if the encoding fails. Also removed pointless and out of place encode/decode of the action enum.
Added a BoatActionDecoderTest which tests encoding/decoding a BoatAction Message.
issue #35#36
#story[1095]
Added EncoderFactory. This creates specific MessageEncoders. Supports JoinAcceptance and RequestToJoin.
Added MessageEncoder interface.
Added JoinAcceptanceEncoder.
Added encode(AC35Data) function to RaceVisionByteEncoder.
Added RequestToJonEncoder.
Updated RequestToJoin and JoinAcceptance decode/encode tests to use the above.
issue #35#36
#story[1095]
- Dispatch commands with CompositeCommand
- Single WindCommand handles upwind and downwind logic
- Changed key bindings as Mac lacks PgUp PgDn
- ControllerServer is observable, RaceLogic updates CompositeCommand as observer
- Created RaceXMLCreator class
- made a function to convert limit to GPS Coordinate (limitToGPSCoordinate)
- can rotate a GPS Coordinate around a point (rotate)
- can get center of a race with (getCenter)
#story[1092]
nightMode.css loads this instead of the regular dark arrow.
ResizableRaceCanvas doesn't cache the race boundary background, as it was unneccessary and stopped the canvas from being transparent.
#story[1093]
Removed arrow control stuff from ResizableRaceCanvas.
Added a wind speed label to arrow.fxml. Also created an outer GridPane to lay things out.
#story[1093]
David Wu
Fan-Wu Yang
hba56
Connor Taylor-Brown
Joseph Gardner
fjc40
Jessica Syder